Skip To Content

Best Auto Repair, Memphis

2457 Covington Pike Memphis, TN 38128

901-386-9600
Opening Hours
  • Mon 7:30AM - 5:00PM
  • Tue 7:30AM - 5:00PM
  • Wed 7:30AM - 5:00PM
  • Thu 7:30AM - 5:00PM
  • Fri 7:30AM - 5:00PM
  • Sat Closed
  • Sun Closed
CONTACT US

PCV Valve Replacement

Posted February 28, 2021 8:07 AM



Hello Memphis, let's talk about your often-unnoticed but extremely important PCV valve. The energy from exploding fuel is what powers your engine. But some of the vapors from the explosions escape into the lower part of the engine, called the crankcase. The crankcase is where your engine oil hangs out. These gases are about 70% unburned fuel. If the gases were allowed to stay in the crankcase, they would quickly contaminate the oil and turn it to sludge. Memphis folks know that sludge is one of the biggest enemies of your engine, clogging it up and eventually leading to expensive failures. Also, the pressure buildup would cause seals and gaskets to blow out. Therefore, these gases need to be vented out.

Pre-1963, gasoline engines had a hose that let the  fumes vent out into the air. In 1963, the federal government required gas engines to have a special one-way valve installed to help reduce dangerous emissions. (Can you imagine how polluted our TN air would be if every car had been releasing those poisonous fumes for the last 50 years?) Diesel engines are not required to have these valves.

The positive crankcase ventilation (PCV) valve routes crankcase gases through a hose and back into the air intake system where they are re-burned in the engine. Fresh, clean air is brought into the crankcase through a breather tube. It's really a pretty simple system, but it does the job. The re-circulating air removes moisture and combustion waste from the crankcase, preventing sludge. This extends not only the life of your oil but the engine as well. The PCV relieves pressure in the crankcase, preventing  oil leaks.


Eventually, the PCV valve can get gummed up. Then it can't move enough air through the engine to keep it working properly for Memphis vehicles. If the PCV valve is sticking enough, you could have oil leaks, excess oil consumption and a fouled intake system. If you experience hesitation,  surging or an oil leak, it may be a sign of PCV valve problems. Your vehicle's owner's manual may give a recommendation for when the PCV valve should be replaced - usually between 20,000 mi/32,000 km and 50,000 mi/80,000 km. Unfortunately, some don't list a recommendation in the manual, so it can be easy to overlook.


Many PCV system problems can be diagnosed by our technicians at Madison Automotive . Fortunately, PCV valve replacement is both quick and inexpensive at Madison Automotive. Proper oil changes will greatly extend the life of the PCV valve. Skipping a few recommended oil changes can allow varnish and gum to build up in the valve, reducing its efficiency. So now when your Memphis service technician tells you its time to replace your PCV valve, you will know what he's talking about. If you have had your car for a while and this is the first you've ever heard of a PCV valve, ask your technician to check yours out or call Madison Automotive at (901)386-9600.

Madison Automotive
2457 Covington Pike
Memphis, TN 38128
(901)386-9600
http://www.madisonautomotive.net



Search



Archive

August 2020 (16)
September 2020 (4)
October 2020 (4)
November 2020 (5)
December 2020 (4)
January 2021 (6)
February 2021 (4)
March 2021 (4)
April 2021 (4)
May 2021 (5)
June 2021 (4)
July 2021 (4)
August 2021 (5)
September 2021 (4)
October 2021 (5)
November 2021 (4)
December 2021 (4)
January 2022 (6)
February 2022 (4)
March 2022 (4)
April 2022 (4)
May 2022 (5)
June 2022 (4)

Categories

Air Conditioning (4)Alignment (1)Alternator (2)Automotive News (2)Battery (3)Brakes (4)Check Engine Light (1)Cooling System (4)Dashboard (1)Diagnostics (2)Drive Train (1)Exhaust (1)Fluids (5)Fuel Economy (2)Fuel Saving Tip: Slow Down (1)Fuel System (12)Headlamps (1)Maintenance (17)Oil Change (1)Older Vehicles (1)Parts (1)Service Intervals (3)Service Standards (1)Shocks & Struts (1)Spark Plugs (1)Steering (1)Suspension (1)Timing Belt (2)Tire Rotation and Balancing (1)Tires (2)Tires and Wheels (11)TPMS (1)Warranty (1)Water Pump (1)What Customers Should Know (16)Windshield Wipers (2)Winter Prep (1)
  • ASE (Automotive Service Excellence)
  • ASE Master Technician
  • Napa
  • Napa
  • Car Care Aware

Testimonials

, 05/26/2022
Madison Automotive is the place to go if you want your work done right the first time. No hassle, no markup, no trying to sell you what you don't need. Good guys.
view all reviews
TAP TO CALL NOW 901-386-9600 X