AUTONET TV

Motor Oil?The Synthetic Advantage (Synthetic oil vs Conventional)

You’ve probably already heard that regular oil changes are extremely important for the health of your vehicle’s engine. That’s sound advice.  But what you might not know is when it comes to motor oil, the real thing may not be the best thing for your engine.

There are different types of motor oil:
•    Conventional oil, extracted from the ground and refined.
•    Synthetic oil, manufactured from high-quality base oils and artificially-made chemical compounds.
•    Synthetic oil blend, a mixture of conventional and synthetic oils.

The first thing you need to know is that most new engines require synthetic oil.  If synthetic oil is recommended for your car – you MUST use it.

For the rest, there are many advantages to using synthetic oil over conventional oil. 

•    Synthetic oil provides better protection for your engine while helping it to perform better.
•    Conventional oil breaks down over time, while synthetic oil lasts longer.
•    Synthetics can stand higher temperature extremes, both heat, and cold.

Synthetic oil can be a better choice if you live in an extremely hot or cold climate or put a lot of strain on your engine by towing or carrying heavy loads.  It also may be good for older engines that sometimes have a tendency to develop sludge. 

Synthetic oil is a more expensive option, but you likely won’t have to have your oil changed as often.  Some synthetics are recommended to last 10,000-15,000 miles/16,000-24,000 km between changes. 

You might also consider a synthetic blend that gives you some of the advantages of synthetic oil at a lower cost. Have a talk with your service adviser about recommendations for what will best suit your vehicle and driving habits. 

It’s interesting to note that in recent years, more than one out of two vehicle owners are opting for synthetic oil or a synthetic blend when they get their oil changed. Sounds like they’re on to something. In the long run, if you have fewer oil changes with synthetics, you’ll use less oil, a bonus for our environment. 

Madison Automotive
2457 Covington Pike
Memphis, TN 38128
(901)386-9600
http://www.madisonautomotive.net

More than Pads and Rotors (Brake Caliper Replacement)

You might be familiar with brake pads and rotors, two components of your vehicle's brakes that have to be regularly serviced.  Here's another important component of your brakes: the calipers.

Calipers are used in disc brakes, the type of brakes now found in most recently manufactured vehicles.  A caliper is the part of the brakes that squeezes the brake pads against the discs, or rotors, which turn with your wheels. 

There are different kinds of calipers, but the basic principle is the same.  You press down the pedal, brake fluid activates a piston or pistons that squeeze the brake pads against the disc and the friction slows down your vehicle.

While modern vehicles have a warning system to let you know it's time to get your brakes checked, your brake light usually goes on when your fluid level is low or your fluid pressure is low.  But you may have to look out for signals your calipers are the problem. 

If your vehicle pulls to one side when you brake, that could be a sign that one caliper isn't working right.  If you smell a burning odor coming from a wheel after a trip, there might be too much pressure from a caliper.  Grinding or squealing when you brake is another signal that it may be time to bring in your vehicle so we can check your brakes.

One way to minimize brake issues is regular inspection.  Have them periodically looked at when you bring in your vehicle for an oil change.  The good news is brake issues are more likely to be caused by pads or rotors wearing out.  Calipers last a lot longer, but even they will need replacing every so often.  

Madison Automotive
2457 Covington Pike
Memphis, TN 38128
(901)386-9600
http://www.madisonautomotive.net

Lubricate Driveshaft

See if any of these are happening to your vehicle.  You feel it vibrating excessively underneath when it’s running, or you hear strange clunking, grating, or grinding sounds coming from beneath.  Maybe it’s hard to turn your vehicle, or you can hear squeaking when you’re going slow.  Perhaps you feel a shudder when you step on the throttle.  

Any of those could be signs that your vehicle’s driveshaft might need lubricating, and it’s important to have one of our technicians check it out. Your vehicle’s engine puts out a lot of twisting power.  That force is called torque, and the driveshaft is the part that handles the job of transferring all that torque from your engine to the wheels.  If it’s a four-wheel or all-wheel drive vehicle, it will have driveshafts front and rear. 

Some driveshafts have different segments which are connected by couplings called U-Joints.   So that everything can glide along fine, that whole assembly needs to stay well lubricated.  Our technician can inspect the driveshaft and U-joints to make sure there aren’t any broken or excessively worn parts.  

Many manufacturers recommend servicing and lubricating the driveshaft at certain intervals, and it’s important to keep on that schedule.  It’s essential because poor lubrication can lead to a failure while you are driving, possibly causing other expensive parts to fail.  Not keeping your driveshaft lubricated or failing to maintain it regularly is the top cause of driveshaft problems. 

Madison Automotive
2457 Covington Pike
Memphis, TN 38128
(901)386-9600
http://www.madisonautomotive.net

Oh, Stop! (Disc Brake Service)

Every time you drive your vehicle, you wear down your brakes just a little bit.  And after a while, that adds up.  Gradually, your stopping power isn't like it used to be.  Since brakes are one of your vehicle's most important safety features, it just makes sense to keep them performing well.

Most vehicles have disc brakes.  One key component, as the name suggests, is the disc.  Most vehicles have discs on their front and rear wheels.  The discs (also called rotors) are made of metal, and each rotates with the wheel hub.  Your brakes also have pads that make contact with the rotors when you press down on the brake pedal, and the friction stops your vehicle.

After many, many stops, that friction wears down both the pads and the discs and reduces their ability to stop the way you need them to.  The discs may also become uneven from all the heat they generate, and your brakes won't stop as well as they used to when they were newer. 

Some signs that your rotors need attention include vibration at the wheels when you stop, discolored rotors (the metal looks blue), excessively hot rotors, or grooves in the metal.  If you see any of these signs, it's time to bring in your vehicle for us to inspect your brakes. 

A technician will measure the thickness and trueness of the rotors and check the surfaces for wear.  If they need to be replaced, they'll be done in pairs, so if a front rotor is bad, the other front rotor will also be replaced. Usually, your brake pads will be replaced at the same time.  You can ask your service advisor if higher-performance brakes would benefit you.

When your vehicle is at the shop, the technician will check other components of your brake system to make sure they are operating safely. Brakes are vital to the safe operation of your vehicle.  Keep them well maintained so they can be there when you need them.

Madison Automotive
2457 Covington Pike
Memphis, TN 38128
(901)386-9600
http://www.madisonautomotive.net